Skip to content
KD Group, Kerrie DoerreXp RealtyBook a call

from the blog

Buying an Old House in Portland, OR: 5 Problems to Check Before You Close

Buying an old house in Portland? The 5 problems to check before you close: radon, seismic bolting, sewer lines, buried oil tanks, and knob and tube wiring.

By Kerrie Doerr, Portland real estate broker, eXp Realty

Published November 19, 2026

Older Portland Oregon home being inspected before purchase, buying an old house in Portland

What actually goes wrong when you buy an old house in Portland, and which problems are worth walking away over?

The five problems I look for in older Portland homes are radon, a house that isn't bolted to its foundation, an old sewer line, a buried heating oil tank, and knob and tube wiring. Most of them cost a few hundred dollars or less to check during your inspection period, and the last one can keep you from getting homeowners insurance, which means you don't close.

Roughly a quarter of the homes in Portland were built in 1939 or earlier (about 26.8%, per Point2Homes' summary of U.S. Census American Community Survey data). My name is Kerrie, and I'm a Portland real estate agent. I work with a lot of relocating buyers, and I read a lot of inspection reports with them, especially on older homes. My job is to translate what looks scary on an inspection report into outcomes we can actually accomplish: what's a priority, what we negotiate on, and how it compares to what you're used to.

In this post I'll walk through all 5 problems, ranked from the cheapest fix to the one that can stop your closing, and then how the Oregon inspection period works so you know what to do with what you find.

Table of Contents

Radon: The Cheapest Fix on the List

Radon is an odorless, colorless, radioactive gas, and you can't see it on an inspection report unless you test for it. It comes from decaying uranium in the ground, comes up out of the soil, and typically collects in the bottom floor of your home.

The Oregon Health Authority publishes home radon test results by ZIP code. In its most recent table (last updated December 2023), about half of the homes tested in 97213, which is classic Northeast Portland, came in at or above 4 picocuries per liter (50.3%). That 4 is the EPA's action level. In a lot of other Portland ZIP codes it's roughly a quarter to four in 10 homes. In Happy Valley (97086) it goes down, but it's still there: about 7% of homes.

So why should you care? Because consistent exposure to radon over time increases your risk of lung cancer. That's a big deal.

The honest caveat with this data is that these are homes that chose to test. It's not a full sample and it's not random, but it's the best public data we have. The Oregon Health Authority's recommendation is to test every single home, regardless of ZIP code.

The good news is the price. A professional radon test in Portland is typically around $200 or less (Angi puts the Portland average at $164). A mitigation system runs about $1,300 on average in Portland per HomeAdvisor, and can reach $2,500 or more depending on the house. On the scale of things, this is a low-cost test and a cheaper fix.

One thing most people don't know: Oregon doesn't regulate radon mitigation companies. So if a system goes in, get a follow-up test to make sure it's working. And once you have a mitigation system, you'll want to retest every couple of years to make sure the fan is still pulling the radon from the lower levels of your house and venting it outside properly.

Radon tends to concentrate at the lowest level of the house. It's typically highest in a basement and dissipates as you go up. It also fluctuates a lot based on the season, the time of day, and the weather, so do long-term tests wherever possible to know your true exposure.

If you're planning to roll in and convert the basement into the hangout room or the kids' bedrooms, and you don't want to pay for the test or mitigate when the results come back high, radon is going to trip you up. It's cheap. Just pay for the test.

The good news is that this is a very fixable issue. It's fixable, it's affordable, and a high result is something you negotiate with the seller on. It's not something you need to walk away from.

Seismic Bolting: The Earthquake Retrofit You Can See in the Basement

A lot of older Portland homes aren't bolted to their foundation. Many of them also have what's known as a cripple wall: a short wall in the crawl space that sits between the foundation and the first floor. The City of Portland notes that many homes built before 1960 were never bolted down.

In a strong earthquake, which could happen in Portland, the frame of the house can slide right off the foundation. Even if the frame moves six inches, that can total the house. An unbraced cripple wall can collapse and jeopardize the structural stability of the whole home.

I'm not here to tell you when the earthquake is going to happen, because nobody has a crystal ball. But if you live in Portland, this is a real risk, and there is a way to reduce it. The City of Portland publishes a standard method for exactly these two fixes: bolting the house to the foundation and adding plywood bracing to the cripple walls. FEMA calls these retrofits highly cost effective because they address major weak points at a low cost relative to the value of the house.

For a typical single-family home, bolting the house to the foundation can cost anywhere from about $5,000 to $20,000. That's a broad range because it depends on where the work is being done. Is it an unfinished basement? Or a finished basement where you have to cut through the drywall, bolt the house, and then refinish the area?

Hillside homes are more complicated. If the cripple wall is really tall, you've got the hillside risk plus the height of the house plus the stilts, and that can get much more expensive. Anyone buying on a steep slope should bring out a structural engineer to evaluate the home's stability and safety.

The cool thing is that if the basement is unfinished, it's really easy to see whether the home has been seismically retrofitted. Your realtor should be able to point out the plates and the braces. They're distributed all around the house so they share the load in the different ways the house can move during an earthquake. If your realtor gets excited and starts talking about seismic retrofitting, that's what they're talking about.

So far, everything on this list has hovered at or under about $10,000. The next three are where things get expensive. And the number one problem isn't really about the repair bill. It's about whether you can get homeowners insurance at all.

Sewer Line: The $150 Scope You Should Never Skip

The sewer line is the pipe that runs from your house out to the street, where it connects to the main line the city operates. In an older Portland home, that line can be the original, which means clay or cast iron.

And you know what else we have a lot of in Portland? Beautiful mature trees, whose roots go looking for water and nutrients. Sometimes those roots run right through your sewer line. Over time you also get cracks, sags, and bellies, and sometimes the whole thing collapses.

Everybody knows Portland gets rain. What most people don't know is that our summers are pretty dry. The soil gets waterlogged in the winter and spring and dries out over the summer, and that swelling and shrinking moves and shifts the pipes sitting in it. That puts more strain on these old lines.

In Portland, the city is responsible for the main line. The homeowner is responsible for the sewer line from the house to the curb, including the section under the sidewalk and parking strip, per the City of Portland. If the repair runs into the sidewalk or parking strip, that needs additional permitting from the city, which adds time, cost, and complexity.

It's not just older houses, either. I just had a closing in Lake Oswego. Nice area, nice house, built around 2005, which is very new on the scale of Portland homes. The sewer line was running up the grade. You can't have water running uphill, that's just not how gravity works, so the whole line had to be dug out and replaced. The challenge was that this sewer was buried 15 to 16 feet deep, about twice the normal depth here, so the project cost about twice as much as we normally see.

Full sewer line replacements in Portland typically run around $7,000 or $8,000 up to about $15,000. On that Lake Oswego house, the first bid was $35,000. The second bid was $26,000. These can be scary numbers.

The good news is that a sewer scope is so affordable, around $150. So you need to do it. Even on new construction, you need to do it. Weird stuff ends up in sewer lines and you want to know. Don't skip it, and don't let anybody tell you to skip it.

The other good news is that a failed sewer scope isn't necessarily a deal breaker. It's leverage in the negotiation. Not always, because there are no absolutes in real estate, but a lot of the time the seller handles it.

If you're stretching every dollar to close and a $10,000 repair would sink you, buying an old house without a clean scope is a real risk. If a scope fails, we're talking to the seller about it. And even if you have reserves in the bank, I'm still going to fight for a new sewer line, because that's not what you want to spend $10,000 on just to move in. You'd much rather spend it on new flooring, tile, and paint. So let me take care of the sewer.

Skipping the sewer scope to save a couple hundred dollars is the absolute best way to lose money in Portland. Don't do it.

Buried Oil Tank: The Treasure Nobody Wants in the Backyard

Before natural gas, a lot of Portland homes were heated with oil, and that oil was stored in a tank in the basement or buried somewhere on the property. Plenty of those old tanks are still in the ground in Portland, and some of them may or may not have been decommissioned properly.

In Oregon, decommissioning an old heating oil tank is voluntary, per the Oregon Department of Environmental Quality (DEQ). Here's what matters for you as a buyer:

  • Is there a tank on the property? You can look it up, and you can have someone come out and look for it.
  • If there is a tank, has it been decommissioned properly?
  • If it hasn't, consider soil sample testing to find out whether it's leaking or has leaked at some point.

If a tank leaks, it's the current owner's responsibility to handle the cleanup. So if you wait until after closing, guess who the current owner is? That's you.

Oil tank sweeps, as we call them in Portland, are like radon testing and sewer scoping: not particularly expensive. Someone comes out to the property, at around $200 max, and scans it with essentially a very fancy metal detector. They look for clues that there was a tank, check old records, and look all around the property. If soil testing is needed, that's typically a couple hundred more and takes a couple of business days to get results back from the lab. All of this is fairly affordable.

Where things get expensive is if the tank has leaked and needs to be cleaned up properly. A big cleanup can cost $35,000, depending on the extent of the leak and the location.

Here's an insider tip: DEQ has a public records search (Your DEQ Online) where you can look up an address and see whether there's any history of tank decommissioning or cleanup work at that property. Make that part of your research when you're buying an old house in Portland.

Knob and Tube Wiring: The One That Can Stop Your Closing

Knob and tube wiring is most common in homes built from the 1880s to about the 1940s, and it's the item on this list that can stop you from getting homeowners insurance. This one also tends to show up at the worst moment, when the clock is already running on your inspection period.

It's not automatically dangerous just because it's old, but there are a couple of issues. First, it's ungrounded. Second, it's not designed for modern electrical loads: your computer, your washer, your dryer. Think about what didn't exist in the 1880s and what we're running through these circuits now.

And after 100 years of homeownership, there are probably some questionable splices and changes in the wiring. That's one of the quirks of Portland properties. They're old, so you get generations of decisions and adaptations that may or may not make sense for modern life.

The other challenge is when it's in the attic and someone has blown a bunch of insulation on top of it. As the wire heats up with use, the insulation plus the heat is a fire hazard. That also adds cost to the replacement, because depending on the type of insulation, you may have to pull it all out, rewire, and then blow new insulation back in over the new wiring.

Insulation also makes it harder to see. There are clues in certain houses. Some older homes have period light switches, which may be a cosmetic choice a homeowner kept for character after updating the electrical, or may indicate knob and tube. If you're in an unfinished basement, you can look up at the floor joists and sometimes see knob and tube there. It may or may not be live, but it gives you a sense of the house and its wiring.

Here's the real problem. Some homeowners insurance companies won't write a policy if they find out the home has active knob and tube. They might require an electrician's sign-off. They might require a full rewire. It depends on the situation. But if you can't get homeowners insurance on a house, you're not closing on the house.

A full rewire of knob and tube in an old house is expensive. Nationally it runs about $12,000 to $36,600, with an average around $24,300, per Angi's 2026 data. And if you have plaster walls (it's an old house, so you probably do), that pushes it even higher, because you need a specialist who can work with plaster.

The other caveat: your inspector can't open up walls. They can only inspect what they can see. So if they see any sign of knob and tube in the attic or the basement floor joists, that's your signal to call in an electrician for a more detailed look.

You can also check a home's permit history on portlandmaps.com to see whether electrical work has been done. And if you're planning to open walls and take areas down to the studs anyway, you can tackle the knob and tube while you're in there. Either way, if the home you're buying has knob and tube, get your homeowners insurance process started early so you know whether it's going to be a blocker.

How the Oregon Inspection Period Works

On the standard Oregon purchase agreement, unless you negotiate something different, your inspection period is 10 business days, and the deadline is 5:00 p.m. Pacific on the last day. That's 10 business days from the day your offer is accepted to do your inspections, negotiate with the seller, and get something agreed to.

That might feel like a lot, but in practice it's fairly tight. Book your inspection, sewer scope, radon test, and tank sweep in the first couple of days. That gives you time to get the information, bring out specialists for bids on specific projects, and put your requests in writing.

There are four ways to structure what you ask for:

  1. A straight repair. This is typically the seller's least favorite option, because they have to manage the work and take on the risk. It's a ding for your side too, because you can't control the quality of the work.
  2. A credit toward your closing costs. You bring less money to closing, and the money you held back becomes your budget for hiring the contractor after you close. You choose the contractor, the timeline, and the work.
  3. A price reduction. This lowers your monthly payment and saves you interest over the long run, but it doesn't give you cash to get the work done.
  4. Walking away. You need to give written notice before the deadline.

Here's the one thing you absolutely need to know: if the deadline passes with no signed agreement and no written notice, silence counts as accepting the house as-is. If you need more time, get a written agreement to extend the deadline before the deadline hits.

This is your realtor's job to stay on top of, and to advise you on what's best for your situation. But it's important that you, as the buyer, know your options.

Which Old-House Risks Matter Most for You?

Prioritize radon testing if you plan to turn the basement into living space, like a hangout room or bedrooms. Test, and budget to mitigate if the results come back high.

Think twice about seismic risk if you want zero projects and you're looking at a 1910 house on a steep lot. If it's a standard bungalow with a small crawl space or an unfinished basement, this is a pretty easy thing to solve.

Insist on a clean sewer scope if you're stretching every dollar to close and a $10,000 repair would sink you. Even with reserves, push for the seller to handle it.

Run a tank sweep and DEQ records search if the house was built before natural gas heat was common, or there's any sign of an old fill pipe.

Call your insurance agent early if the inspector sees any sign of knob and tube in the attic or basement.

Consider new construction if none of this sounds worth it. That's a completely valid answer, and newer homes do avoid some of these issues. But you still need a sewer scope, and you give up other things like character, sometimes lot size, sometimes location. With an old house, you can check for all of these, so you know what you're dealing with.

Conclusion

Here it all is in one breath: test for radon, look for seismic bolting, scope the sewer, sweep for a tank, and call your insurance agent. Most of these checks cost a few hundred dollars, and they all belong inside your 10-day inspection period.

Old Portland homes are absolutely worth it for a lot of people. I live in one myself. But when buyers are considering them, I want them buying with their eyes wide open. I want you to know what you're getting into and what's happened in the house historically before it becomes part of your story.

If you're moving in the next 12-18 months, call or text me at 971-443-1770 and we can schedule some time to chat through your specific situation. You can also email me at kerrie@kdrealestatepdx.com.

Book a 30-minute call

FAQ

How much does a radon test cost in Portland, Oregon?

A professional radon test in Portland typically costs around $200 or less, and Angi puts the local average at $164. If results come back high, a mitigation system averages about $1,300 in Portland per HomeAdvisor and can reach $2,500 or more depending on the house. The Oregon Health Authority recommends testing every home, regardless of ZIP code.

Do I need a sewer scope on a newer house in Portland?

Yes. A sewer scope costs around $150, and problems show up in newer homes too, including one built around 2005 in Lake Oswego where the line ran uphill and replacement bids came in at $26,000 to $35,000. In Portland, the homeowner is responsible for the sewer line from the house to the curb, so you want to know its condition before you close.

How can I tell if a Portland house has been seismically retrofitted?

If the basement or crawl space is unfinished, look for anchor bolts and metal plates connecting the house to the foundation, and plywood bracing on the short cripple walls. They're spread around the whole perimeter of the house. Your realtor or inspector can point them out, and a finished basement or hillside home may need a closer look or a structural engineer.

Who pays to clean up a leaking heating oil tank in Oregon?

The current owner of the property is responsible for cleaning up a leaking tank. If a leak is discovered after you close, that owner is you. That's why a tank sweep (around $200) and soil testing if needed should happen during your inspection period, and you can search Oregon DEQ's public records by address for past decommissioning or cleanup work.

Can you get homeowners insurance on a house with knob and tube wiring?

Sometimes, but some insurers won't write a policy on a home with active knob and tube wiring, or will require an electrician's approval or a full rewire first. Without homeowners insurance, you can't close. If your inspector sees any sign of it, call your insurance agent and an electrician early in your inspection period.

How long is the inspection period when buying a home in Oregon?

On the standard Oregon purchase agreement, the default inspection period is 10 business days from offer acceptance, with a 5:00 p.m. Pacific deadline on the last day, unless you negotiate a different length. If the deadline passes with no signed agreement and no written notice, you've accepted the house as-is, so get any extension in writing before the deadline.

Sources

come say hi

Thinking about a move to Portland?

Book a free 30-minute call. Bring your timeline, your budget and every question you have. Even if you haven't decided on Portland yet, it's not too early.

Prefer email? kerrie@kdrealestatepdx.com